ETT8062 Electric Two-Way Valve

ETT8062Electric Two-Way Valve

Product Overview

The ETT8062 series electric two-way valve is suitable for central air conditioning system fan coil water circuit on/off control as a supporting product. It consists of two parts: the actuator and the valve body, with built-in limit contacts and equipped with a manual switch, which can cut off power when the valve is fully open or fully closed, preventing motor wear and coil burnout caused by prolonged power-on, thereby extending the service life and maintenance cycle of the actuator. It is used to control the opening or closing of cold/hot water system pipelines to achieve room temperature control. The actuator uses a synchronous motor to drive and control the opening and closing of the electric valve, keeping the valve in the open or closed state.

Actuator Technical Parameters

Operating Voltage: AC220V±10% 50/60Hz

Power Consumption: 6W (only during valve opening and closing)

Housing Material: Flame-retardant PC (internal parts are flame-retardant reinforced PA)

Control Type: On/Off, three-wire two-control

Valve Body Material: Brass

Valve Stem: Stainless Steel

Seal: NBR

Applicable Medium: Chilled Water, Hot Water

Fluid Temperature: 5℃-95℃

Nominal Pressure: PN1.6MPa

Note: If three-wire one-control is required for control characteristics, please specify when ordering.

Product Specifications